BAS8 – 8″ 400 WATTS RMS CLASS A/B POWERED SUBWOOFER IN PORTED ENCLOSURE Speaker by Massive

FEATURES:

  • Heavy-gauge Steel Basket with Industrial Texture Painting
  • Dual-Stacked High Flux Y30 90oz Strontium Ferrite Magnets
  • Dual Impedance / 2″ 4 Layer Hi-Temp Voice Coil
  • Poly-Cotton Spider with Woven Round Tinsel Leads
  • UV Treated / Non-Pressed Paper Cone with EROM Foam Surround
  • Round Shape PP Vacuum Dust Cap
  • 10mm Top Plate
  • Customized Rubber Gasket & Magnet Boot
  • Black Anodized Deep Steel Woofer Bars
  • Dual Impedance Black Anodized Former
  • Quick Disconnect 4 AWG PWR / GND / REM Terminals
  • Low Pass Control with Built-In 12dB Octave Butterworth Crossover
  • Phase Control ~ 0° – 180°
  • Clip LED Indicator
  • Bass Boost from 0dB ~ +12dB @45Hz
  • Remote Gain Control
  • High-Quality Industrial Grade Carpet Ported Enclosure

SPECIFICATIONS:

Size 8″
Watts RMS 400w
Peak Power 800w
Cone UV Treated / Non-Pressed Paper
Voice Coil 2″ Dual 4 Ohm
Surround EROM Foam
Magnet 90oz
Terminals 5 Way Binding Push Terminals
Basket Heavy Gauge Steel
Tinsel Leads Woven Round
X-Max 10mm (1-way) + 10mm Top Plate
SPL 88 dB @2.83V/1m
FS 42.1Hz
Crossover Control Variable 50Hz ~ 200Hz / 12dB Octave Butterworth
Bass Boost 0 ~ -12dB @45Hz
Frequency Response 25Hz ~ 200Hz
Input Sensitivity 200mV ~ 10V
Fuse Rating 25A x 2
Dimensions 17.1″ x 11″ x 10.6″
Category:

Our Massive Audio BAS8 is the perfect Bass solution for those with limited space and an unlimited thirst for sound quality. The BAS6 is an 8″ Pre-Loaded Powered Subwoofer conservatively rated to handle 400 Watts RMS, yet efficient enough to yield a Sound Pressure Level of 88db with just 2.83 Volts at 1 Meter. It utilizes an internally wired 2″ Inch, 4 Layer, 2 Ohm Voice Coil. The BAS8 Subwoofer incorporates tight Red stitching that’s sewn through a UV treated non-pressed paper cone with an EROM Foam Surround. The entire cone assembly is bonded to a heavy gauge steel basket that bolts to double stacked high flux Y30 70oz Strontium Ferrite Magnets that have a 10mm top plate. The critical function of keeping the voice coil centered in the magnetic gap is performed by the poly-cotton spider with woven round tinsel leads. Connections to your power source of choice are confidently made with heavy-duty spring-loaded 5-way binding terminals. Our enclosure has black anodized deep steel woofer bars to protect the cone and is finished with high-quality industrial-grade carpeting.

Powered by a Class A/B high-performance built-in amplifier with (ATO) Auto Turn-On, Audio Sensing, and Remote Trigger. The Built-In Hi-Low converter allows you to connect speaker wire directly from your system to RCA’s that connect directly into the amplifier. The amplifier also  features a Quick Disconnect 4 AWG Power Terminal, Low Pass Control with Built-In 12dB Octave Butterworth Crossover, Bass Boost, Phase Control, and a Clip LED ensuring you are not sacrificing on quality or features in this all in one Bass P